Screener – Online Trading Platforms | CFDs and Forex Markets | InvestorHubFx https://fxtrading.com Mon, 20 Mar 2023 05:47:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 Saving Studies https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/saving-studies/ Thu, 20 Oct 2022 01:12:42 +0000 https://investorhubfx.com/?p=36319 In every study you will notice a red button that says “Save Study”. You can select any symbol you want by ticking the magenta box (White in MT4) right next to each symbol’s name, and then click on the “Save Study” button in order to save your selection and use it later on Signals. Every time that a new signal arrives matching the criteria you just saved, including the asset, the timeframe and all the other parameters from each study, you will have the option to get an Alert. 

]]>
RSI https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/rsi/ Thu, 20 Oct 2022 01:11:27 +0000 https://investorhubfx.com/?p=36313 The Relative Strength Index (RSI), developed by J. Welles Wilder, is a momentum oscillator that measures the speed and change of price movements. The RSI oscillates between zero and 100. Traditionally the RSI is considered overbought when above 70 and oversold when below 30. Signals can be generated by looking for divergences and failure swings. RSI can also be used to identify the general trend. 

A RSI’s case study 

The normal default setting for RSI is 14 on technical charts, however in the current case study we examine what happens to the major FX instruments after 3-days since RSI (5) hits or goes  to 27 or below. 

As we can see above, the majority of major FX instruments react positively after 3-days since RSI (5) crosses above the oversold level (27). 

By reviewing USDJPY, we see that the study contains 1961 bars. Since 2014.12.17, RSI crossed above the 27 level 102 times. According to the statistics, we see that the last case resulted in a positive 0.19% change. Further, by looking at the mean % change and median % change, we see that both were bullish (0.16% and 0.21% respectively).  

By clicking on the USDJPY symbol, we can get the graph with the study’s results as below (only available in MT5). 

In the MT4 version we have to select only one level, and the option to see what happens if the price crosses above or below this level. 

In the example that follows, we can see what happens when the price crosses below the 30 level of the RSI. 

]]>
Technical Indicators  https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/technical-indicators/ Thu, 20 Oct 2022 01:09:00 +0000 https://investorhubfx.com/?p=36308 Technical indicators are mathematical tools that analyze one of the five following figures: open price, high, low, closing price and volume. As a result of the calculation, technical indicators are plotted graphically as chart patterns.  

Bollinger Bands 

Bollinger Bands is a technical indicator developed by John Bollinger, which is used to measure a market’s volatility and identify “overbought” or “oversold” conditions. 

Bollinger Bands are typically plotted as three lines: An upper band, a middle line, a lower band. 

The middle line of the indicator is a simple moving average (SMA). 

Most charting programs default to a 20-period, which is fine for most traders, but traders can experiment with different moving average lengths after they get a little experience applying Bollinger Bands. 

The upper and lower bands, by default, represent two standard deviations above and below the middle line (moving average). 

The Screener results for BBands displays the following: 

A BBands’s case study 

We examine what happens to the major FX instruments after 8-days since prices hit or closed below the lower band (BBands: 23, 2). 

According to the following table, we see that the majority of the instruments experienced a bullish movement, after 8-days since prices hit or closed below the lower band (BBands: 23, 2). 

By picking up USDJPY, we see that the study contains 1961 bars. Since 2015.01.15, a more than 1% gain within a week has occured 103 times. According to the statistics, we see that the last case resulted in a positive 1.69% change. Further, by looking at the mean % change and median % change, we see that both were bearish (0.39% and 0.29% respectively).  

By clicking on the USDJPY symbol, we can get the graph with the study’s results as below (only available in MT5).  

]]>
% Change https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/change/ Thu, 20 Oct 2022 01:06:54 +0000 https://investorhubfx.com/?p=36304 A common interest of traders is to monitor abnormal % changes in prices on different time frames and act according to their preferences. However, it would be interesting if traders had a tool to examine different studies, such as what was happening in the past to an instrument next day after 1% daily change? This is where InvestorHubFx Navigator™ % Change is helpful. 

It displays the price’s % change at a checkpoint after a certain % change occurs in a bar. 

A %Change’s case study 

We examine what happens to the major FX instruments 3 weeks after a more than 1% gain occurred within a week.

Once again here, the historical analytics are very encouraging as we can see at the following table. 

Overall, analyzing the above historical data since 2010.01.01, we see that a more than 1% within a week gain resulted in a bearish % change in most of prices’ instruments on average (Mean) after 3 weeks.  

Specifically at the EURUSD pair, we see that the study contains 2682 bars. Since 2010.01.01, a more than 1% gain within a week has occured 115 times. According to the statistics, we see that the last streak resulted in a positive -1.58% change. By looking at the mean % change and median % change, we see that both were bearish (-0.19% and -0.13% respectively).  

By clicking on the EURUSD symbol, we can get the graph with the study’s results as below (only available in MT5).  

]]>
Streak https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/streak/ Thu, 20 Oct 2022 01:04:54 +0000 https://investorhubfx.com/?p=36299 The idea behind the streak is to check what happens at a specific period after a streak event. A streak is the continuous successive movement up or down over a defined period. 

Setup Filter takes the available data after the default starting date 01.01.2010 for the preferred time frame. Traders set the Streak Length, which is the  continuous successive movement up or down over a defined period. The Checkpoint refers to the number of the bars that traders want to monitor after the criteria are met. 

A Streak’s case study 

We examine what happens to the major FX pairs 12-hours after 3 successive 4-hours down moves.  

According to the following table, the historical statistics are very encouraging.  

Overall, analyzing the available historical data after 2010.01.01, we see that a 12-hours falling streak has resulted in positive % change in all prices’ instruments on average (Mean) 12-hours after the 12-hours streak. 

Analyzing the EURUSD symbol, we see that the study contains 43670 bars and 618 streaks since 2010.01.05. According to the statistics, we see that the last streak resulted in a positive 0.21% change. Looking at the mean % change and median % change, we see that both were positive (0.14% and 0.10% respectively).  

By clicking on the EURUSD symbol, we can get the graph with the study’s results as below (only available in MT5). 

]]>
Crosses https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/crosses-2/ Thu, 20 Oct 2022 01:01:40 +0000 https://investorhubfx.com/?p=36290 Short-term moving averages crossing above longer-term moving averages is generally seen as an uptrend and short-term moving averages crossing below long-term moving averages is generally seen as a downtrend. 

A Crosses’ study case  

We examine what happens in the major FX instruments an hour after (Checkpoint: 4, meaning 4 periods of H1 each) 5-period SMA crossover above the 33-period SMA. Always be sure to check the timeframe to be sure what the period (i.e. H1 time frame) represents. 

Traders set the Fast MA period  (i.e. 5) and the Slow MA period (i.e. 33), then select Cross Up or Down (i.e. Up) and the Checkpoint (i.e. 4). At the Checkpoint box, traders count the bars that they want to monitor after the criteria are met, then click on the Calculate button. 

The Screener for Crosses displays the following: 

1. Symbols 

2. Total Bars, which is the total number of bars since the beginning of the range (e.g. available data after the 01.01.2010) 

3. Cross Count, which is the count of the Crosses that Investors set at in the Setup Filter. 

4. First Cross 

5. Last Cross 

6. Last/Mean/Median display the change % for the study that traders set. 

Overall, analyzing the above historical data after the default starting date 2010.01.01, we see that the 5-period SMA crossover to 33-period SMA in the M15 time frame has resulted in a positive % change in all prices’ instruments on average (Mean). 

More specifically, picking up the EURUSD pair, we see that the study contains 101200 total H1 bars and 1663 crossover of 5-period SMA to 33-period SMA. According to the statistics, we see that the last crossover resulted in a 0.49% change. Additionally, looking at the mean % change and median % change, we also see that both were positive (0.07% and 0.03% respectively).  

One might interpret these results as saying that while the study produces positive results for going long (bullish) probably it’s a good and profitable strategy to follow.. 

By clicking on the EURUSD symbol, we get the graph with the study’s results as it seems below (only available in MT5) 

In the MT4 version, we have a different look and feel but the logic remains pretty much the same. In this version we also have a notification if the study is active right now. In this example we see that the GBPUSD currency pair had a cross up during the last 10 bars (checkpoint) and currently is on a -3.39% from this cross.  

]]>
What are the Screener features? https://investorhubfx.com/en/fxt-navigator-guide/screener/screener-items/what-are-the-screener-features/ Thu, 20 Oct 2022 00:53:38 +0000 https://investorhubfx.com/?p=36280 InvestorHubFx Screener offers a tool for practicing manual trading using historical data. Traders can simulate their rules to test how well they would have fared under particular historic market conditions, and to check how well their favorite indicators under certain criteria would have guided them in the past.  

InvestorHubFx Screener helps traders to pick up studies with the tools, such as Crosses, Streak, % Change, BBands and RSI and check the historical results. 

Screener’s definitions: Before we continue with the case studies, let’s explain the terms “Starting date”, “last”, “mean” and “median”.

Starting Date 

InvestorHubFx Screener displays the historical results when the above criteria is met. Default starting date is 2010.01.01, although the tool displays data since they are available (maybe after the starting date). By clicking F7, traders can change the default starting date.  

Last, Mean and Median % Change 

The term “last” refers to the last bar % change. The term “mean” is the “average”, where you add up all the numbers and then divide by the number of numbers. The “median” is found by ordering a set from lowest to highest and finding the exact middle.  

]]>
InvestorHubFx Navigatior User Guide | Market Watch Tools: Screener nonadult